gototopgototop

پورتال انجمن صنایع آبکاری ایران

Standards and projects under the direct responsibility of TC 107 Secretariat and its SCs

 

Standard and/or project

TC/SC or WG

شمارهاستاندارد ملي

رديف

1ISO 1456:2009
Metallic and other inorganic coatings -- Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium

TC 107/SC 3

2161

1

9ISO 1460:1992
Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area

TC 107/SC 4

1554

2

11ISO 1461:2009
Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods

TC 107/SC 4

-

3

16ISO 1463:2003
Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

TC 107

-

4

17ISO 2063:2005
Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys

TC 107/WG1

8562 و1225

5

20ISO 2064:1996
Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness

TC 107

4683

6

23ISO 2080:2008
Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary

TC 107/WG3

4681

7

26ISO 2081:2008
Metallic and other inorganic coatings -- Electroplated coatings of zinc with supplementary treatments on iron or steel

TC 107/SC 3

8549

8

28ISO 2082:2008
Metallic and other inorganic coatings -- Electroplated coatings of cadmium with supplementary treatments on iron or steel

TC 107/SC 3

2219

9

32ISO 2093:1986
Electroplated coatings of tin -- Specification and test methods

TC 107/SC 3

9344

10

35ISO 2177:2003
Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution

TC 107

4679

11

36ISO 2178:1982
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method

TC 107

6827 و4669

12

37ISO 2179:1986
Electroplated coatings of tin-nickel alloy -- Specification and test methods

TC 107/SC 3

9350

13

39ISO 2360:2003
Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method

TC 107

6828 و 4680

14

41ISO 2361:1982
Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method

TC 107

4667

15

59ISO 2746:1998
Vitreous and porcelain enamels -- Enamelled articles for service under highly corrosive conditions -- High voltage test

TC 107/WG2

-

16

60ISO 2747:1998
Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock

TC 107/WG2

-

17

62ISO 2819:1980
Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion

TC 107

4674

18

65ISO 3497:2000
Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods

TC 107

10373

19

66ISO 3543:2000
Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method

TC 107

10372 و 4673

20

68ISO 3543:2000/Cor 1:2003

TC 107

-

21

69ISO 3613:2000
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods

TC 107

8245

22

75ISO 3868:1976
Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

TC 107

-

23

78ISO 3882:2003
Metallic and other inorganic coatings -- Review of methods of measurement of thickness

TC 107

4685

24

79ISO 3892:2000
Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods

TC 107

8244

25

81ISO 4516:2002
Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests

TC 107

4682

26

83ISO 4518:1980
Metallic coatings -- Measurement of coating thickness -- Profilometric method

TC 107

-

27

84ISO 4519:1980
Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

TC 107

-

28

85ISO 4520:1981
Chromate conversion coatings on electroplated zinc and cadmium coatings

TC 107/SC 8

8550

29

87ISO 4521:2008
Metallic and other inorganic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes -- Specification and test methods

TC 107/SC 3

-

30

93ISO 4524-2:2000
Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests

 

TC 107/SC 7

-

31

95ISO 4524-3:1985
Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity

TC 107/SC 3

-

32

98ISO 4524-6:1988
Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts

TC 107/SC 3

6-8720

33

99ISO 4525:2003
Metallic coatings -- Electroplated coatings of nickel plus chromium on plastics materials

TC 107/SC 3

8242

34

102ISO 4526:2004
Metallic coatings -- Electroplated coatings of nickel for engineering purposes

TC 107/SC 3

-

35

104ISO 4527:2003
Metallic coatings -- Autocatalytic (electroless) nickel-phosphorus alloy coatings -- Specification and test methods

TC 107/SC 3

-

36

105ISO 4528:2000
Vitreous and porcelain enamel finishes -- Selection of test methods for vitreous and porcelain enamelled areas of articles

TC 107/WG2

-

37

106ISO 4530:1983
Vitreous and porcelain enamelled manufactured articles -- Determination of resistance to heat

TC 107/WG2

-

38

107ISO 4531-1:1998
Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 1: Method of test

TC 107/WG2

-

39

108ISO 4531-2:1998
Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 2: Permissible limits

TC 107/WG2

-

40

109ISO 4532:1991
Vitreous and porcelain enamels -- Determination of the resistance of enamelled articles to impact -- Pistol test

 

TC 107/WG2

-

41

111ISO 4534:1980
Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test

TC 107/WG2

-

42

114ISO 4536:1985
Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)

TC 107/SC 7

4677

43

115ISO 4538:1978
Metallic coatings -- Thioacetamide corrosion test (TAA test)

TC 107/SC 7

4675

44

116ISO 4539:1980
Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)

TC 107/SC 7

4676

45

118ISO 4541:1978
Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

TC 107/SC 7

4668

46

120ISO 4543:1981
Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions

TC 107/SC 7

-

47

122ISO 6158:2004
Metallic coatings -- Electrodeposited coatings of chromium for engineering purposes

TC 107/SC 3

-

48

124ISO 6370-1:1991
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 1: Abrasion testing apparatus

TC 107/WG2

-

49

125ISO 6370-2:1991
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 2: Loss in mass after sub-surface abrasion

TC 107/WG2

-

50

126ISO 6988:1985
Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

TC 107/SC 7

4671

51

127ISO 7587:1986
Electroplated coatings of tin-lead alloys -- Specification and test methods

TC 107/SC 3

9345

52

129ISO 8289:2000
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects

TC 107/WG2

-

53

132ISO 8291:1986
Vitreous and porcelain enamels -- Method of test of self-cleaning properties

TC 107/WG2

-

54

133ISO 8401:1986
Metallic coatings -- Review of methods of measurement of ductility

TC 107

4670

55

135ISO 9220:1988
Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method

TC 107

-

56

136ISO 9587:2007
Metallic and other inorganic coatings -- Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement

TC 107/SC 3

8565

57

138ISO 9588:2007
Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement

TC 107/SC 3

8566

58

140ISO 9717:1990
Phosphate conversion coatings for metals -- Method of specifying requirements

TC 107/SC 8

-

59

142ISO 10111:2000
Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods

TC 107

-

60

143ISO 10289:1999
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests

TC 107/SC 7

-

61

144ISO 10308:2006
Metallic coatings -- Review of porosity tests

TC 107/SC 7

8246

62

146ISO 10309:1994
Metallic coatings -- Porosity tests -- Ferroxyl test

TC 107/SC 7

8735

63

147ISO 10546:1993
Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

TC 107/SC 8

8243

64

148ISO 10587:2000
Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method

TC 107

-

65

149ISO 11408:1999
Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods

TC 107/SC 8

9346

66

153ISO 12683:2004
Mechanically deposited coatings of zinc -- Specification and test methods

TC 107/SC 3

-

67

154ISO 12686:1999
Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish

TC 107/SC 3

-

68

155ISO 12687:1996
Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test

TC 107/SC 7

-

69

161ISO 13805:1999
Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)

TC 107/WG2

-

70

163ISO 13807:1999
Vitreous and porcelain enamels -- Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry

TC 107/WG2

-

71

164ISO 13807:1999/Cor 1:2000

TC 107

-

72

167ISO 14231:2000
Thermal spraying -- Acceptance inspection of thermal spraying equipment

TC 107/WG1

-

73

168ISO 14232:2000
Thermal spraying -- Powders -- Composition and technical supply conditions

TC 107/WG1

-

74

169ISO 14647:2000
Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test

TC 107/SC 7

-

75

170ISO 14713:1999
Protection against corrosion of iron and steel in structures -- Zinc and aluminium coatings -- Guidelines

TC 107/SC 4

-

76

174ISO 14916:1999
Thermal spraying -- Determination of tensile adhesive strength

TC 107/WG1

-

77

175ISO 14917:1999
Thermal spraying -- Terminology, classification

TC 107/WG1

-

78

176ISO 14918:1998
Thermal spraying -- Approval testing of thermal sprayers

TC 107/WG1

-

79

177ISO 14919:2001
Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions

TC 107/WG1

-

80

179ISO 14920:1999
Thermal spraying -- Spraying and fusing of self-fluxing alloys

TC 107/WG1

-

81

180ISO 14921:2001
Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components

TC 107/WG1

8564

82

182ISO 14922-1:1999
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use

TC 107/WG1

-

83

183ISO 14922-2:1999
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements

TC 107/WG1

-

84

184ISO 14922-3:1999
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements

TC 107/WG1

-

85

185ISO 14922-4:1999
Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements

TC 107/WG1

-

86

186ISO 14923:2003
Thermal spraying -- Characterization and testing of thermally sprayed coatings

TC 107/WG1

-

87

187ISO 14924:2005
Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings

TC 107/WG1

-

88

188ISO 15695:2000
Vitreous and porcelain enamels -- Determination of scratch resistance of enamel finishes

TC 107/WG2

-

89

189ISO 15695:2000/Cor 1:2000

TC 107

-

90

190ISO 15720:2001
Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

TC 107/SC 7

-

91

191ISO 15721:2001
Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

TC 107/SC 7

-

92

192ISO 15724:2001
Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method

TC 107

8734

93

193ISO 15726:2009
Metallic and other inorganic coatings -- Electrodeposited zinc alloys with nickel, cobalt or iron

TC 107/SC 3

13362

94

194ISO 15730:2000
Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel

TC 107/SC 8

9352

95

195ISO 16348:2003
Metallic and other inorganic coatings -- Definitions and conventions concerning appearance

TC 107

-

96

196ISO 17334:2008
Metallic and other inorganic coatings -- Autocatalytic nickel over autocatalytic copper for electromagnetic shielding

TC 107/SC 3

-

97

197ISO 17834:2003
Thermal spraying -- Coatings for protection against corrosion and oxidation at elevated temperatures

TC 107/WG1

-

98

198ISO 17836:2004
Thermal spraying -- Determination of the deposition efficiency for thermal spraying

TC 107/WG1

-

99

199ISO 18332:2007
Metallic and other inorganic coatings -- Definitions and conventions concerning porosity

TC 107/SC 7

-

100

200ISO 21968:2005
Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method

TC 107

-

101

201ISO 22778:2006
Metallic coatings -- Physical vapour-deposited coatings of cadmium on iron and steel -- Specification and test methods

TC 107/SC 3

10040

102

202ISO 22779:2006
Metallic coatings -- Physical vapour-deposited coatings of aluminium -- Specification and test methods

TC 107/SC 3

10041

103

203ISO 26945:2008
Metallic and other inorganic coatings -- Electrodeposited coatings of tin-cobalt alloy

TC 107

-

104

206ISO 27830:2008
Metallic and other inorganic coatings -- Guidelines for specifying metallic and inorganic coatings

TC 107/SC 3

-

105

207ISO 27831-1:2008
Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 1: Ferrous metals and alloys

 

TC 107/SC 3

-

106

208ISO 27831-2:2008
Metallic and other inorganic coatings -- Cleaning and preparation of metal surfaces -- Part 2: Non-ferrous metals and alloys

TC 107/SC 3

-

107

209ISO 27874:2008
Metallic and other inorganic coatings -- Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes -- Specification and test methods

TC 107/SC 3

-

108

210ISO 28706-1:2008
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature

TC 107/WG2

-

109

211ISO 28706-2:2008
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours

TC 107/WG2

-

110

212ISO 28706-3:2008
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel

TC 107/WG2

-

111

213ISO 28706-4:2008
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

TC 107/WG2

-

112

214ISO 28706-5:2008
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 5: Determination of resistance to chemical corrosion in closed systems

TC 107/WG2

-

113

215ISO 28721-1:2008
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 1: Quality requirements for apparatus, components, appliances and accessories

 

TC 107/WG2

-

114

216ISO 28721-2:2008
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 2: Designation and specification of resistance to chemical attack and thermal shock

TC 107/WG2

-

115

217ISO 28721-3:2008
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 3: Thermal shock resistance

TC 107/WG2

-

116

218ISO 28722:2008
Vitreous and porcelain enamels -- Characteristics of enamel coatings applied to steel panels intended for architecture

TC 107/WG2

-

117

219ISO 28723:2008
Vitreous and porcelain enamels -- Determination of the edge covering on enamelled steel plate to be used in heat exchangers

TC 107/WG2

-

118

220ISO 28762:2008
Vitreous and porcelain enamels -- Enamel coatings applied to steel for writing surfaces -- Specification

TC 107/WG2

-

119

221ISO 28763:2008
Vitreous and porcelain enamels -- Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers -- Specifications

TC 107/WG2

-

120

222ISO 28764:2008
Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron

TC 107/WG2

-

121

223ISO 28765:2008
Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

TC 107/WG2

-

122

 

 

спросил Дилвиш, когда они догнали ""его.

Потом в ""том месте, где он касался камня, он ощутил леденящий холод.

Какой я был дурак, что хвастал этим!

Самому ""Джеку приходилось нести эту службу много раз, и пару раз даже вместе с Повелителем Нетопырей.

Аззи хотел было ""заказать что-нибудь развлекательное, например танцовщиц, но тут же отказался от этой мысли.

И память у меня вроде как у вас на меню.

Алексей Земятин взял руку Генерального и положил себе на грудь.

Земятин велел, чтобы из аэропорта Внуково его везли не в Кремль, а к Генеральному домой, "Скачать игры на телефон говорящий кот том"за город.

Весь мир призывался в свидетели.

Иногда их тела летели в одну сторону, а головы в другую.

Я утверждаю, что "Она не твоя скачать лепс"вы, сознательно или нет, но занимались колдовством.

Известно, стрелять в эрцгерцога штука нелегкая.

Заходи, как будешь в наших краях.

Мысли Поля вернулись к прошлому, "Клетка квест пистолс скачать"одновременно к той сцене и одному из снов.

Он широко открывал рот, но его горло не рождало ничего, "Скачать утопии томас мор"кроме бульканья и хрипа, его походка стала тверже и уверенней.

Да, скверно, что и говорить; если бы я мог хоть как-нибудь помочь беде, я бы без колебаний бросился на выручку.

Это зависит от того, в каком окружении он вырос и был воспитан.

Привет, Харолд, "Капелькою неба песня скачать"тихо отозвался Берри.

Тут ваше сиятельство, "Справочник начинающего автолюбителя" как говорится, перегнули палку.

Поддав "Ожившие буквы Для детей 4-5 лет" газу, Бронзини "Окружающий мир. Итоговая аттестация за курс начальной школы. 10 вариантов заданий. Критерии оценок. Контрольные ответы. Образец выполнения тестовых заданий" направил свой Харли-Дэвидсон в "Секреты самогипноза" объезд, и помчался по "Бешеные бабки в 6 Б" дороге к лагерю.

Подойдя поближе, сенатор "Авантюристка Смерть в наследство" по-дружески приобнял его за "Гений общения" плечи.

Если стонать правильно, "Четыре времени года Приметы загадки..." это могло ускорить события.

Вразвалку, враскачку, "Цветы для дома Советы и секреты успешного выращивания" вприпрыжку.

Их не ждала слава, "Самая настоящая любовь" от их тел не требовалось, чтобы они действовали на пределе своих возможностей.

 

تبلیغات

اینجا محل تبلیغ شما است

  اطلاعات بیشتر 

44842240 و 4442239

شرایط درج آگهی در سایت انجمن


شما اینجا هستید  : خانه کمیته های تخصصی کمیته تدوین استاندارد ملی استانداردهای TC107